The AFM delete harness re-routes fuel pump system control back to the ECU as well as allows a plug and play option for an Intake Air Temp Sensor via the 2 pin DTM connector supplied. Simply plug in a DTM style IAT right into the harness or use the supplied DTM connector and pins to extend/relocate the sensor further away.
The AFM delete harness plugs right into the BODY side of the AFM wiring, basically emulating the AFM that will now be removed.
Without this harness, your fuel system will not operate when the AFM is removed.
This Adapter can only be used when paired with an aftermarket ECU & is configured to pair with DJT-Performance ECU Plug & Play Adapters.
